used for building modified bitumen SBS waterproof material
Basic Info
Model No.: cs002
Product Description
1)anticorrosion
2)non-toxicity,odourless,non-pollution
3)good flexibility
Products Detail (1)modified bitumen SBS waterproof material is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains)or Polythene Membrane etc
(2)Characteristic:
a)Good impermeability b)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack. c)SBS modified bitumen membrane is specially being applied in the cold area with low temperature ,
d)Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering Applicable scope Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade I civil building and industrial building which has special waterproofing requirement
SBS Technical data Confirming to GB18242-2008 | |||||||
No. | Item | I | II | ||||
PY | G | PY | G | ||||
1 | Soluble content/(g/m2)≥ | 3mm | 2100 | ||||
4mm | 2900 | ||||||
Test |
| No flame |
| No flame | |||
2 | Heat Resistance | °C | 90 | 105 | |||
≤mm | 2 | ||||||
Test | no flow no dripping | ||||||
3 |
Low temperature flexibility/°C | -20 | -25 | ||||
no crack | |||||||
4 | Impermeability 30minutes | 0.3Mpa | 0.2MPa | 0.3MPa |
| ||
5 | Tension | Maximum/(N/50mm) | 500 | 350 | 800 | 500 | |
Secondly-Maximum |
|
|
|
| |||
Test | no crack no apart | ||||||
6 | Elongation | Secondly-Maximum≥ | 30 |
| 40 |
| |
Secondly-Maximum≥ |
|
|
|
| |||
7 | Oil Leaking | Pieces≤ | 2 |
Product Categories : Modified bitumen waterproof membrane
Premium Related Products